Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Page 1 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data

Page 1 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 1 INSTALLATION GUIDE FOR IBM’s DB2 DATABASE SERVER SOFTWARE This chapter of the Product Kit Installation Guide is designed to specifically provide you with complete instal- lation instructions when installing the Version 7.1 IBM DB2 Database Server and Client Software. These ap- plications should be loaded and configured and operational before installing the Infinity POWER accounting system, if this is the database configuration you have chosen to utilize. SETUP.EXE (Installation of IBM DB2 Database Server V7.1) Place the IBM’s “DB2 Server for Windows CD-ROM into your CD drive on your computer system. From Windows, click on “Start” and select “Run” from the Task Bar. In the Open box, enter the drive letter for your CD:\setup.exe. Select “Install” to begin the installation process and the following screen will appear: Page 2 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 2 Select both, the “DB2 Workgroup Edition” and the “DB2 Administration Client.” Click on the “Next” button to continue. The next screen to appear will be the “Select Installation Type” screen. Click on “Typical” and then on the “Next” button to continue the installation routine. The next screen to appear will require you to “Enter Username and Password for Control Center Server.” Page 3 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 3 On this screen you will specify a password for the default DB2 User (db2admin). If the user does not exist, the system will ask if you wish to add them. Be sure to have the checkbox marked for “Use the same values for the remaining DB2 Username and Password settings.” Click on the “Next” button to continue. A screen will appear with a summary of the installation. On the next page is an example of what you may see. Page 4 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 4 Example of Summary of Installation Screen Products to Install: DB2 Workgroup Edition DB2 Administration Client Setup Type: TYPICAL Components to Install: Required DB2 components Communication Protocols APPC IPX/SPX Named Pipes NetBIOS TCP/IP Application Development Interfaces JDBC Support SQLJ Support IBM enhanced Java Runtime Environment ODBC Support OLE DB Support System Bind Files DB2 Query Patroller Client QueryMonitor Tool QueryEnabler Tool Documentation Administration Guide APPC, CPI-C, and SNA Sense Codes Command Reference Connectivity Supplement Data Movement Guide DB2 Query Patroller Administration Guide DB2 Query Patroller Installation Guide DB2 Query Patroller User's Guide DB2 Quick Beginnings for Windows NT DB2 Release Notes DB2 Replication Guide and Reference Glossary Install and Configure Supplement Message Reference SQL Getting Started SQL Reference System Monitor Guide and Reference Troubleshooting Guide What's New Warehouse Center Administration Guide Warehouse Manager Installation Guide DB2 UDB Quick Tour OLAP Setup and User's Guide OLAP Spreadsheet Add-in User's Guide for 1-2-3 OLAP Spreadsheet Add-in User's Guide for Excel DB2 Quick Beginnings for Unix Data Warehousing Tools Warehouse Server Data Warehouse Center Warehouse Local Control Database Data Warehouse Center ODBC Drivers DB2 OLAP Starter Kit DB2 OLAP Starter Kit Server DB2 OLAP Starter Kit Spreadsheet Add-in DB2 OLAP Starter Kit Desktop Base DB2 UDB Support Administration and Configuration Tools Client Configuration Assistant Client Tools Command Center Control Center Database Tools Event Analyzer LDAP Directory Exploitation Web Administration Getting Started First Steps Sample Databases Business Intelligence Tutorial DB2 Instance: Log On Username:db2admin TCP/IP Service Name:db2cDB2 Port Number:50000 Named Pipes Administration Server: Log On Username:db2admin TCP/IP Service Name:db2cDB2DAS00 Port Number:523 Named Pipes Target Directory: C:\Program Files\SQLLIB Program Folder: IBM DB2 After the installation takes place, the system will ask if the OLAP Starter Kit is to be installed. Infinity POWER does not require this application to be installed. Page 5 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 5 Click on the option “Do not install the OLAP Starter Kit.” Click on the “Continue” button to proceed. The IBM DB2 Database Server Installation and Setup is now complete. Click on the “Finish” button to complete setup. SETUP.EXE (Installation of IBM DB2 Client Software V7.1) The installation of the IBM DB2 Client Software should be installed after the IBM DB2 Database Server is in- stalled and configured. Place the IBM’s “DB2 v7.1 Run-Time Client CD-ROM into your CD drive on your computer system. From Windows, click on “Start” and select “Run” from the Task Bar. In the Open box, enter the drive letter for your CD:\setup.exe. Double click on the setup.exe file or highlight it and click on the “Open” button. When this happens, the Install program will load and begin installing the IBM DB2 Client Software. This Welcome Screen introduces you to the IBM DB2 Client Software. If you wish to continue the installation, click on the “Next” button. To abort the installation, click on “Cancel.” The next screen to be displayed is the Se- lect Products. Page 6 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 6 Accept the default product to install. In this case it would be DB2 Run-Time Client. Click on the “Next” button to continue. The next screen is used to select the Destination Location. Click on the “Next” button to continue on to the verification screen, which is shown below. Page 7 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 7 Once you click the “Next” button the system will begin transferring program files. Once all files have been trans- ferred the installation will require you to reboot your computer to update the registry files as shown in the picture below. Page 8 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 8 Click on the “Finish” button and your system will begin the restart process. When your system had finished re- booting go to the “Start” button and select “Programs,” then “DB2 For Windows98” and then “Client Con- figuration Assistant.” Click on the “Add Database” button to start the Add Database SmartGuide. Click on “Search the Network” for the Source so that the system can auto-browse your network for available DB2 servers. Click on the “Next” button to begin the search. Click on the “plus sign (+),” just to the left of “Other Systems (Search the network).” Depending on your network environment, this process may take a while. Once the DB2 servers have been identified, click on the “plus sign (+),” just to the left of the server you wish to connect to. In our example, it is hornet.dpro.com. Page 9 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 9 Click on the “Done” button to select the “DATAPRO” Database. At this time, you have the option to test this connectivity. When you click on “Test Connection,” you will be presented with the following screen where you would specify a User ID and Password. This information can be obtained from you DB2 Administrator. Click on the “OK” button to begin the testing. If the test was a success, you should receive the following message: Page 10 IBM DB2 Client Software Installation Guide Copyright © 1985-2005 by Data Pro Accounting Software, Inc. All Rights Reserved. 10 Click on the “OK” button to close the above dialog box, which in turn returns you to the “Test Connection” dialog box. Once there, click on the “Done” button. Here, you will be presented with a new window reflect- ing your current database connections. At this time you can click on the “Close” button from this window and begin your Data Pro POWER In- stallation for DB2. uploads/s3/ installation-guide-for-ibm-x27-s-db2-database-server-software.pdf