Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

RISCWatch Debugger Installation Guide Version 21 February 24, 2010 Title Page ©

RISCWatch Debugger Installation Guide Version 21 February 24, 2010 Title Page ©Copyright International Business Machines Corporation 1997, 2010 Printed in the United States of America February 2010 IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at “Copyright and trademark information” at www.ibm.com/legal/copytrade.shtml. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in applications such as implantation, life support, or other hazardous uses where malfunction could result in death, bodily injury, or catastrophic property damage. The information contained in this document does not affect or change IBM product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of IBM or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environments may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. In no event will IBM be liable for damages arising directly or indirectly from any use of the information contained in this document. IBM Systems and Technology Group 2070 Route 52, Bldg. 330 Hopewell Junction, NY 12533-6351 The IBM home page can be found at ibm.com®. The IBM semiconductor solutions home page can be found at ibm.com/chips. Version 21 February 24, 2010 Copyright and Disclaimer ® Installation Guide RISCWatch Debugger Contents List of Figures......................................................................................................................5 Revision Log........................................................................................................................ 7 1.Introduction.......................................................................................................................9 1.1JTAG Ethernet Target .............................................................................................................................. 9 1.2PIBS Targets............................................................................................................................................. 9 2.Installing JTAG Ethernet Target Hardware (Models 13H6423 and 13H6424)............11 2.1JTAG Ethernet Target Installation .......................................................................................................... 11 2.2Establishing a Network Connection with the RISCWatch Processor Probe.......................................... 13 2.3Setting the TCP/IP Parameters of the RISCWatch Processor Probe.................................................... 14 2.4PIBS Target Hardware Installation ......................................................................................................... 15 3.Installing JTAG Ethernet Target Hardware (Models 41K7355 and 41K7356) ...........17 3.1Processor Probe Model 41K7356 Installation ....................................................................................... 17 3.2Processor Probe Model 41K7355 Installation ....................................................................................... 19 3.3Establishing a Network Connection with the RISCWatch Processor Probe.......................................... 21 3.4Setting the TCP/IP Parameters of the RISCWatch Processor Probe.................................................... 21 3.5PIBS Target Hardware Install ................................................................................................................ 22 4.Installing RISCWatch on Windows............................................................................... 23 4.1Windows Software Installation ............................................................................................................... 23 4.2TCP/IP Package Setup .......................................................................................................................... 23 5.Installing RISCWatch on Linux .................................................................................... 25 5.1Linux Software Installation...................................................................................................................... 25 6.Configuring RISCWatch ................................................................................................27 6.1RISCWatch Environment Setup ............................................................................................................ 27 6.2Program Updates................................................................................................................................... 27 7.Uninstalling RISCWatch.................................................................................................29 Appendix A. Ethernet Crossover Cable.......................................................................... 31 Appendix B. Processor Probe 41K7355 and 41K7356 Equipment Ratings ................33 B.1 General.................................................................................................................................................. 33 B.2 Safety ................................................................................................................................................... 33 B.3 External Power Supply Specifications .................................................................................................. 34 B.4 Test Probe Specifications ..................................................................................................................... 34 B.5 Operating Conditions............................................................................................................................ 35 Version 21 Contents February 24, 2010 Page 3 of 39 Installation Guide RISCWatch Debugger Appendix C. Processor Probe 41K7355 and 41K7356 Electronic Emissions Statement ....................................................................................................... 37 C.1 Federal Communications Commission Statement ............................................................................... 37 C.2 Industry Canada Class A Emission Compliance Statement ................................................................ 37 C.3 Australia and New Zealand Class A Statement ................................................................................... 37 C.4 United Kingdom Telecommunications Safety Requirement ................................................................. 37 C.5 European Union EMC Directive Conformance Statement ................................................................... 37 C.6 Taiwan Electrical Emission Statement ................................................................................................. 38 C.7 Japanese Voluntary Control Council for Interference Statement ......................................................... 38 C.8 Korean Class A Electronic Emission Statement .................................................................................. 38 Appendix D. Product Recycling and Disposal ...............................................................39 Contents Version 21 February 24, 2010 Page 4 of 39 Installation Guide RISCWatch Debugger List of Figures Figure 1-1. RISCWatch JTAG Ethernet Target................................................................................................... 9 Figure 1-2. PIBS Target..................................................................................................................................... 10 Figure 2-1. Embedded JTAG Adapter Assembly.............................................................................................. 11 Figure 2-2. Embedded JTAG Adapter with RISCTrace Assembly (No MICTOR)............................................. 12 Figure 2-3. Embedded JTAG Adapter with RISCTrace Assembly (MICTOR)..................................................12 Figure 3-1. Embedded JTAG Adapter Assembly.............................................................................................. 18 Figure 3-2. Embedded JTAG/Trace Adapter Assembly.................................................................................... 20 Figure A-1. Wiring in a 10BaseT Crossover Cable........................................................................................... 31 Figure C-1. Taiwan Electrical Emission Statement........................................................................................... 38 Figure C-2. Japanese Voluntary Control Council for Interference Statement................................................... 38 Figure C-3. Korean Class A Electronic Emission Statement............................................................................ 38 Version 21 List of Figures February 24, 2010 Page 5 of 39 Installation Guide RISCWatch Debugger List of Figures Version 21 February 24, 2010 Page 6 of 39 Installation Guide RISCWatch Debugger Revision Log Each release of this document supersedes all previously released versions. The revision log lists all signifi- cant changes made to the document since its initial release. Date Pages Description February 24, 2010 – Edited the book for consistency and conformance to IBM style. Version 21 Revision Log February 24, 2010 Page 7 of 39 Installation Guide RISCWatch Debugger Revision Log Version 21 D February 24, 2010 Page 8 of 39 Installation Guide RISCWatch Debugger 1. Introduction This document describes how to install and configure the IBM RISCWatch debugger hardware and software. If you are a first-time RISCWatch user, you must first determine the target type you will use with the RISCWatch debugger. The following sections describe the three possible target types RISCWatch supports. When you determine the target type, you can proceed to the chapter that details the installation procedures for the specific workstation (host) RISCWatch will be installed on. Attention: Before beginning the hardware installation, you must read the enclosed IBM Safety Booklet (SD21-0030-02). 1.1 JTAG Ethernet Target The JTAG Ethernet target type requires hardware that is labeled RISCWatch Processor Probe. One end of the RISCWatch processor probe connects to the host workstation using a standard Ethernet setup. The other end of the processor probe connects to the JTAG connector resident on the target PowerPC board. Figure 1-1. RISCWatch JTAG Ethernet Target Setting the RISCWatch TARGET_TYPE environment variable to jtag_eth (for Processor Probes 13H6423 and 13H6424) or jtag_mgp (for Processor Probes 41K7355 and 41K7356) configures RISCWatch to communicate with the processor probe. See the RISCWatch User’s Manual for additional information about environment variables. When using this target type, you can direct RISCWatch to freeze or stop the processor through execution of specific commands or debug events. When the processor is stopped, you can access and alter all architected resources of the processor (for example, registers) and peripherals connected to the PowerPC processor or processor core. Use of this target type relies on internal processor resources provided in supported IBM PowerPC processors. Debug of the system hardware and software is accomplished without the requirement of any target control program software so that no additional code constraints are put on the PowerPC application. In addition, by using a standard Ethernet connection, RISCWatch can run on any PowerPC board (connected to a processor probe) defined on the network. Four types of RISCWatch processor probes are available for ordering. Two probes provide an added feature called RISCTrace (models 13H6424 and 41K7355). RISCTrace takes advantage of the real-time trace debug logic available on some IBM 400® Series PowerPC processors. See the RISCWatch User’s Manual for more information about RISCTrace. 1.2 PIBS Targets RISCWatch can communicate with the target PowerPC processor over a standard TCP/IP Ethernet network. Setting the RISCWatch TARGET_TYPE environment variable to sim configures RISCWatch to communicate with IBM PIBS (PowerPC Initialization and Boot Software) code which is running on the target PowerPC board. The sim target type uses the standard Ethernet connection available on most host workstations and PCs. Version 21 Introduction February 24, 2010 Page 9 of 39 Installation Guide RISCWatch Debugger Figure 1-2. PIBS Target See the appropriate IBM PowerPC Evaluation Kit documentation for details about setting up your target board to run PIBS code. Note that the PIBS code provided in the evaluation kit can be ported to custom board designs. When using this target type, you can direct the PIBS code to load and control the execution of your application. RISCWatch constantly communicates with the PIBS code on the target system (See Figure 1-2). This means the target PowerPC processor is always running. After loading your program with RISCWatch, debug events are set up to control the execution of your application. These debug events generate debug exceptions, which interrupt normal application program flow so that the read-only memory (ROM) code running on the target system can collect processor status and alter processor resources. Use of this target type relies on the dedicated exception handler and command set API available in PIBS. The PIBS target type is useful for debugging application software on a working target system. Hardware debug is limited because the RISCWatch debugger is dependent upon successful execution of the PIBS code on the target PowerPC system. Introduction Version 21 February 24, 2010 Page 10 of 39 Installation Guide RISCWatch Debugger 2. Installing JTAG Ethernet Target Hardware (Models 13H6423 and 13H6424) This chapter assumes that the host machine is already network connected or at least equipped with an Ethernet card. Follow the hardware installation instructions uploads/s1/ installation-guide 37 .pdf