Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

G-scan User Manual 1 Contents Chapter 1. Getting Started with G-Scan 3 Read me

G-scan User Manual 1 Contents Chapter 1. Getting Started with G-Scan 3 Read me first 4 Introduction to G-Scan 5 Safety Warnings and Cautions 6 Warnings for environment protection 8 Chapter 2. G-Scan Basic Functions 10 Specifications 11 Parts and Components 12 Details of the base unit 19 Power supply to G-Scan 22 Recharge Indications 25 Connecting with the car 26 Power On/Off 28 Chapter 3. G-Scan Basic Operations 29 Main menu and basic tools 30 Flight Recording 35 OBD-II and EOBD 38 Vehicle Diagnosis 44 Configuration 45 Om-Screen User’s Guide 56 G-scan User Manual 2 Chapter 4. G-Scan PC Utility Software 57 Installation and Removal 58 Main menu 64 Recorded Data Viewer 66 Captured Screen Viewer 76 Software Update 81 SD Card Recovery 86 PC Utility Configuration 93 Chapter 5. Appendix 99 Lithium-ion Battery Replacement 100 Cigarette Lighter Fuse Replacement 103 G-Scan OS Update 104 G-Scan Limited Warranty 108 G-scan User Manual 3 1.1. Read me first 1.2. Introduction to G-scan 1.3. Safety warnings and cautions 1.4. Warnings for environment protection Chapter 1. Getting started with G-scan G-scan User Manual 4 1.1 Read me first Getting started with G-Scan AA-1-1. Read me first Preface  Thank you for purchasing G-Scan supplied by GiT(Global Information Technology Co., Ltd)  This manual contains information needed for using G-Scan. We recommend you to read this manual and comprehend the provided functionality before start using G-Scan in order to get the maximum performance out of the product. Notice on intellectual property  GiT owns the intellectual property including but not limited to patents, trademarks and copyright contained in this user’s manual.  No part of this manual may be photocopied, reproduced, or translated to another language in any way without the prior written consent of GiT.  Purchase of this user’s manual shall not be assumed as granting or transferring the rights to utilize intellectual property of GiT contained in this manual.  G-scan is the registered trademark of GiT (Global Information Technology Co., Ltd.). ⓒ 2007, Global Information Technology Co., Ltd. All rights reserved. Disclaimer  GiT reserves the right to change, modify, replace or remove the content of this instruction manual including but not limited to description and graphical illustrations for product enhancement without notice.  Whenever this user’s manual is updated, it is reflected on G-Scan’s on-screen user guide. Therefore we recommend you to keep the G-Scan software applications always up to date. G-scan User Manual 5 1.2. Introduction to G-Scan Getting started with G-Scan AA-1-2. Introduction to G-Scan Functionality Improved user interface is the most outstanding feature of G-Scan, which was designed and constructed for easier and handy operation. G-Scan was developed to provides greater user experience of highly efficient repair service through quick and simple access to the advanced diagnostic functions for the cars of multiple brands Operated by Touch Screen Menu selection is done by simply touching the screen. Intuitive Touch Screen eliminates complicated button pressing procedure for making selections in the menu. Big size 5.6″ Color TFT LCD G-Scan is equipped with the 5.6” large scale Color TFT LCD, which provides greater readability and more convenient user interface. USB Expandability G-Scan provides multiple USB slots for functional expansion by connecting with the external devices that will become available in the future.  Check and erase the self-diagnostic fault codes contained in the electronic control units that support communication with the external diagnostic devices.  Provision of standard diagnostic functions for OBD-II and EOBD compliant cars.  Display and record of actual driving condition data (Flight record)  Provision of advanced diagnostic functions  Provision of actuator test functions G-scan User Manual 6 1.3. Safety Warnings and Cautions Getting Started with G-Scan AA-1-3. Safety Warnings and Cautions This section contains warnings and cautions for safe and proper use of this product, therefore it is recommended that every user should read this section carefully before using the product and make sure that such warnings and precautions are well observed and comprehended.  Place the G-Scan at a secured location and keep clearance with any moving part of the vehicle or hazardous environment when using G-Scan with the vehicle.  Use the power adapter and cables supplied by GiT only when supplying power from then external source.  Make secure connections of all cables and connectors. Be careful not to let the DLC cable or power cable gets disconnected while the G-Scan is operating.  Do not disassemble or dismantle the G-Scan base unit in any case.  Supply stable power from the external source (using AC/DC adapter) when updating G-scan software (Operating System, Firmware and Application updates).  Use only the parts and accessories authorized by GiT.  Keep G-Scan within the specified storage temperature when not in use (See spec sheet)  Use G-Scan only for the original purposes as it was designed for.  Beware that the user shall be fully liable for any direct or consequential damage or loss caused by not following the instructions provided in this G-Scan user’s manual.  Beware that only the service personnel authorized by GiT is entitled to provide aftersales service for G-Scan.  Observe the instructions of this user’s manual when replacing the rechargeable battery.  Do not use the rechargeable battery other than GiT supplies.  Do not disassemble the rechargeable battery in any case.  Do not put the rechargeable battery in the water and keep away from moisture. Warning Dangerous consequences may arise, with the possibility of fire, death or serious injury to the user, if the product is not handled properly as instructed below. The user shall be fully liable for any direct or consequential damage or loss caused by not following the instructions provided in this G-Scan user’s manual. G-scan User Manual 7  Keep the rechargeable battery from the heat.  Do not apply physical impact to the rechargeable battery or pierce with a sharp object.  Do not put the rechargeable battery in the microwave oven or high-voltage container.  In case any smell, heat, distortion or discoloration is observed with the rechargeable battery, stop using it. If such a symptom is witnessed when charging or operating, remove the battery from the base unit.  Be careful not to put the rechargeable battery polarity reversed.  Be careful not to short-circuit the rechargeable battery terminals.  Do not connect the rechargeable battery terminals directly with the external power sources.  Do not put the rechargeable battery in fire or expose it to direct sun light.  GiT is not liable for any loss or damage cause from using parts or accessories that GiT has not supplied.  Put G-scan base unit on a secure place and avoid unstable, inclined or slippery place. Be careful not to drop the G-Scan base unit.  Avoid humidity and dusts when storing and using G-scan in order to prevent electric shock or fire.  Use the stylus pen supplied as the basic accessory of G-Scan when touching the screen. Use of sharp or pointed object may cause serious and irrecoverable damage to the touch screen film.  Do not put heavy objects such as hand tools on G-Scan base unit.  Be careful not to cause damages to the cables by heat from the engine or the moving parts in the engine compartment when G-Scan connection is made under the hood.  Securely tighten the screw lockers when connecting the DLC main cable to the G-Scan base unit.  When supplying power from the vehicle battery, check the connection for correct polarity.  Stow the parts and accessories that are not in use in the G-Scan carry case.  Do not use the cables connected to the G-scan base unit as the handle.  Avoid following hazards for storing G-Scan. - Very high or low temperature (See Spec sheet) - Very high or low humidity (See Spec sheet) Caution Dangerous consequences may arise, with the possibility of serious injury to the user and or damage to the product, if the equipment is not handheld correctly as instructed below. The user shall be fully liable for any direct or consequential damage or loss caused by not following the instructions provided in this G-Scan user’s manual. G-scan User Manual 8 - Exposure to direct sunlight  Avoid physical impart and vibration when carrying G-Scan.  Keep away from moisture when storing or using G-Scan.  Keep away from flammable substances or static inducing environment when storing or using G- Scan.  Keep away from chemical or acid material that may damage G-Scan base unit or accessories.  Do not expose G-Scan to X-ray or microwave, otherwise it may cause serious damage  Do not put the SD card upside down when inserting to the base unit.  Use only the AC/DC adapter that is supplied with G-Scan when supplying power from AC source.  Storing the rechargeable battery in a hot place may shorten its lifetime.  Observe the storage conditions (Temp:23±5℃, Humid:65±20%RH, Battery Indicator :2 steps uploads/Sante/ g-scan-guide.pdf