-EASURE WHATISMEASURABLE ANDMAKEMEASURABLE THATWHICHISNOT 'ALILEO'ALIL

-EASURE WHATISMEASURABLE ANDMAKEMEASURABLE THATWHICHISNOT 'ALILEO'ALILEI  Program Description mPDS 2000V3 Beverages (COBRIX, CARBO, ... Programs) Firmware Version: V05.02 - Software Version: B08.00 Program Description mPDS 2000V3 Beverages (COBRIX, CARBO, ... Programs) Firmware Version: V05.02 - Software Version: B08.00 While every precaution has been taken in the preparation of this document, Anton Paar GmbH assumes no responsibility for technical or printing errors or omissions. Nor is any liability assumed for damages resulting from the use of the information contained in this instruction manual. Anton Paar GmbH does not make a commitment to update the information in this manual. Specifications are subject to change without notice. All rights reserved (including translation). No part of this document may be translated, reproduced or distributed in any form (print, photocopy, microfilm or any other process) without the prior written permission of Anton Paar GmbH. Trade marks may be used in this instruction manual without being marked as such. These are the property of their respective owners and are legally protected. Published by Anton Paar GmbH. Printed in Austria. Copyright © 2005 Anton Paar GmbH, Graz, Austria Contact: Anton Paar GmbH Anton-Paar-Str. 20 A-8054 Graz / Austria - Europe Tel: +43 316 257-0 Fax: +43 316 257-257 E-mail: info@anton-paar.com Web: www.anton-paar.com Date: 10.02.2005 Document number: A90IB14G.fm A90IB14 5 Contents 1 Safety Instructions........................................................................................................................... 7 2 Symbols in the Program Description............................................................................................. 9 3 Operating Instructions Overview ................................................................................................. 10 4 Checklist for Start-up .................................................................................................................... 12 5 Application Program COBRIX....................................................................................................... 13 5.1 Application Specific Measuring Values.................................................................................. 14 5.2 'Run-Stop' CARBO Transducer ............................................................................................. 15 5.3 Product Selection / CIP Cleaning .......................................................................................... 16 5.4 Product Type (softdrink, alc. softdrinks, beer, wine, alcohol/water)....................................... 16 5.5 Adjusting the Diets (Prod-Type = 0) ...................................................................................... 17 5.6 Adjusting the Sugared Beverages (Prod-Type 0 or 1)........................................................... 18 5.7 Adjusting Alcoholic Beverages (sugared beverages containing alcohol, wine and alcohol/water mixtures) (Prod-Type = 2, 4 and 5) ................................................................. 19 5.8 Adjusting Beer (Prod-Type = 3)............................................................................................. 20 5.9 Adjusting the CO2.................................................................................................................. 21 5.10 Line Stopped (Flow Stop) ...................................................................................................... 22 5.11 Cleaning ................................................................................................................................ 22 5.12 Line Shut Down ..................................................................................................................... 22 5.13 Error Messages and Warnings .............................................................................................. 23 5.14 Hints for Putting into Operation.............................................................................................. 25 5.15 Setup of the FlowStop (Hold) Function.................................................................................. 33 5.16 CARBO Transducer Setup .................................................................................................... 34 5.17 Sodium Hydroxide Concentration during CIP........................................................................ 35 5.18 Spike Filter............................................................................................................................. 36 6 CARBO............................................................................................................................................ 37 6.1 Application Specific Measuring Values.................................................................................. 37 6.2 'Run-Stop' CARBO Transducer ............................................................................................. 37 6.3 Product Selection / CIP Cleaning .......................................................................................... 38 6.4 CO2 Adjustment .................................................................................................................... 38 6.5 Cleaning ................................................................................................................................ 39 6.6 Filler Stop Function (HOLD Function).................................................................................... 39 6.7 Line Shut Down ..................................................................................................................... 40 6.8 Error Messages and Warnings .............................................................................................. 40 6.9 Hints for Putting into Operation.............................................................................................. 41 6.10 CARBO Transducer Constants.............................................................................................. 46 6 A90IB14 7 Application Program Alcohol ....................................................................................................... 47 7.1 Application Specific Measuring Values.................................................................................. 47 7.2 Product Selection................................................................................................................... 48 7.3 Adjusting the Concentrations Using Constant Offsets........................................................... 48 7.4 Error Messages and Warnings .............................................................................................. 49 7.5 Hints for Putting into Operation.............................................................................................. 49 8 Application Program Proof ........................................................................................................... 52 8.1 Application Specific Measuring Values.................................................................................. 52 8.2 Product Selection................................................................................................................... 52 8.3 Adjusting the Concentration using Constant Offset............................................................... 53 8.4 Error Messages and Warnings .............................................................................................. 53 8.5 Hints for Putting into Operation.............................................................................................. 54 9 Document Numbers....................................................................................................................... 57 Appendix A: Menu Trees ................................................................................................................ 58 1 Safety Instructions A90IB14 7 1 Safety Instructions • This program description does not claim to address all of the safety issues associated with the use of the mPDS 2000V3 and samples. It is the responsibility of the user to establish health and safety practices and determine the applicability of regulatory limitations prior to use. • Before using the mPDS 2000V3, read this program description completely. • Anton Paar GmbH only warrants the proper functioning of the mPDS 2000V3 if no unauthorized adjustments have been made to mechanical parts, electronic parts and software, and the following points are adhered to. • Follow all hints, warnings and instructions in the program description to ensure the correct and safe functioning of the mPDS 2000V3. • Do not use the mPDS 2000V3 for any purpose other than described in the program description. Anton Paar GmbH is not liable for damages caused by incorrect use of the mPDS 2000V3. • Do not use any accessories other than those supplied or approved by Anton Paar GmbH. • The installation procedure should only be carried out by authorized personnel who are familiar with the installation instructions. • Do not operate the mPDS 2000V3 if a malfunction is suspected, or damages, injuries or loss of life cannot be excluded under all circumstances. • The mPDS 2000V3 is not an explosion-proof instrument and therefore must not be operated in areas where there is a risk of explosion. • Service and/or maintenance procedures which involve removing outside covers and working with the power switched on may only be performed by authorized service personnel. • Ensure that all operators are fully trained to use the mPDS 2000V3 correctly and safely. • Due to the nature of the measurement, the measuring results not only depend on the correct use and functioning of the mPDS 2000V3, but may also be influenced by other factors. We therefore recommend that the analysis results are plausibility tested before consequential actions are taken. • Repair and service procedures may only be carried out by authorized personnel or by Anton Paar GmbH. 1 Safety Instructions 8 A90IB14 • The Anton Paar transducers used in process are often exposed to extreme working conditions such as shock pressure, sudden changes in temperature, aggressive samples, etc. which may cause drifts or failure. Therefore, it is absolutely necessary to periodically check the measured results and readjust the transducers if necessary. • When connecting an intrinsically safe DPR(n)/SPRn transducer, use the IPS 501 from Anton Paar between the hazardous and safe area. • Dispose of the mPDS 2000V3 according to the country-specific legal requirements. Do not touch areas marked with this symbol (yellow) when the power is turned on. 2 Symbols in the Program Description A90IB14 9 2 Symbols in the Program Description The following symbols are used in the program description: Warning: The "Warning" sign indicates a hazard. It calls attention to an operating procedure, practice, etc. which, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a "Warning" sign until the indicated conditions are fully understood and met. Important: The "Important" sign indicates a hazard. It calls attention to an operating procedure, practice, etc. which, if not correctly performed or adhered to, could result in damage or destruction of the instrument or parts of it. Do not proceed beyond an "Important" sign until the indicated conditions are fully understood and met. Hint: The "Hint" sign calls attention to any additional information which might be of use to the operator. 3 Operating Instructions Overview 10 A90IB14 3 Operating Instructions Overview This manual contains the program description for the application program Beverages (COBRIX, CARBO... Programs). Keypad functions: Keypad functions in the measuring window: • "Ö" : - To move to the warning window. • "Õ": - To move to the service window (Time, Date, Period, Temp, …). • "E" : - To move to the main menu. Keypad functions for navigation through the menus: • "Õ" and "Ö": - To move from one menu item to the next in the same menu level. • "×" : - To scroll a number or input character. - To escape the current menu. • "Ø" : - To scroll a number or input character. - To change immediately to the measuring window. • "E" : - To select a particular menu item. Auto repeat: If you press one of the 4 keys and hold it, the key function is repeated automatically. This can be used for a quick change of the selected menu or a quick change of a digit or letter, for example. The auto repeat rate is about 2 counts per second. Hint: For detailed information about the mPDS 2000V3 see mPDS 2000V3 instruction manual. 3 Operating Instructions Overview A90IB14 11 Reset: • If the mPDS 2000V3 has to be reset (e.g. if the power cannot be switched off) press "Õ", "×" and "Ö" simultaneously. This has the same effect as switching the power off and on. • After the reset the mPDS 2000V3 is locked. Special keypad functions for changing numbers: To change numerical values, press "Õ" or "Ö" to select the position of the cursor and then press "×" or "Ø" to increase or decrease the value of the digit or to change the sign (+, -) above the cursor. Changing the display contrast: To change the display contrast, press "Ö" and "×" simultaneously to lower and "Ö" and "Ø" simultaneously to raise the illumination. After a change, press "Õ" to save the display contrast settings. How to unlock the mPDS 2000V3 if it is locked: 1. Select the main menu by pressing "E". 2. Select [Lock/Unl] with "Ö" or "Õ" and “E”. 3. Select [Edit] and key in the password (numerical value). Use "Ö" or "Õ" to select the position uploads/Litterature/ a90ib14g-e-application-beverages.pdf

Documents similaires

uploads/Litterature/ concentration-lecture 1 .pdf 0 0

République algérienne démocratique et populaire Ministère de l’enseignement sup 0 0

Application 1 {Permutation de 2 variables} Program permutation; uses wincrt; va 0 0

SAFETY STATEMENTS & PILL SIZE GUIDE Every price box for Swanson® Brand suppleme 0 0

Calendrier cours de l'histoire du roman 2020-2021 Date prévue Détails du cours 0 0

12/12/2019 "Soyez simple: apprenez les compétences électriques avec des images 0 0

uploads/Litterature/ concentration-lecture.pdf 0 0

Construction d'une application Il est bien loin le temps où réaliser un program 0 0

Personnages de Laelith : Jimmy Lightfeet Version « Héros & Dragons » 2.0 du 5 a 0 0

JAVA-012 : Programmation Orienté Objet - Application au langage JAVA TP : Appli 0 0

• Détails
• Publié le Jul 23, 2022
• Catégorie Literature / Litté...
• Langue French
• Taille du fichier 0.9822MB