Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

SmartPlant 3D Plant Design System (PDS) Guide Version 2007 January 2007 DSP3D-P

SmartPlant 3D Plant Design System (PDS) Guide Version 2007 January 2007 DSP3D-PE-200065B Copyright Copyright 2005-2007, Intergraph Corporation. All Rights Reserved. Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper authorization. Portions of this software are owned by Spatial Corp. © 1986-2007. All Rights Reserved. Restricted Rights Legend Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is “restricted computer software” submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the Federal Acquisition Regulations (“FAR”) and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of Defense (“DoD”): This is “commercial computer software” as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3. Unpublished – rights reserved under the copyright laws of the United States. Intergraph Corporation Huntsville, Alabama 35894-0001 Warranties and Liabilities All warranties given by Intergraph Corporation about equipment or software are set forth in your purchase contract, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in this publication is accurate as of its publication date. The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document. The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. No responsibility is assumed by Intergraph for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT. Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is accurate and suitable for their project work. Trademarks Intergraph, the Intergraph logo, SmartSketch, FrameWorks, SmartPlant, IntelliShip, INtools, ISOGEN, PDS, and MARIAN are registered trademarks of Intergraph Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. ACIS is a registered trademark of SPATIAL TECHNOLOGY, INC. Infragistics, Presentation Layer Framework, ActiveTreeView Ctrl, ProtoViewCtl, ActiveThreed Ctrl, ActiveListBar Ctrl, ActiveSplitter, ActiveToolbars Ctrl, ActiveToolbars Plus Ctrl, and ProtoView are trademarks of Infragistics, Inc. Portions of 2D DCM, 3D DCM, and HLM from D-Cubed Limited are incorporated. All rights reserved. Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other brands and product names are trademarks of their respective owners. Table of Contents Table of Contents Preface.................................................................................................................................5 SmartPlant 3D Documentation Set...............................................................................6 Administrative Guides ........................................................................................................ 6 User's Guides ...................................................................................................................... 7 Reference Data Guides ....................................................................................................... 8 ISOGEN Guides ................................................................................................................. 9 What's New with Plant Design System (PDS) Integration.........................................10 PDS Plant Design System: An Overview .......................................................................11 Referencing a PDS Model: An Overview.......................................................................13 Install PDS Data Access.............................................................................................15 New PDS Model Reference Command......................................................................17 PDS Model Reference Dialog Box................................................................................... 17 Reference a PDS Project................................................................................................... 18 Un-reference a PDS Project.............................................................................................. 19 Exporting Data from PDS: An Overview......................................................................21 PDS Exporter Configuration Files: An Overview......................................................22 Install PDS Export Tools............................................................................................26 PDS Model Data Exporter..........................................................................................27 Export PDS Equipment Data to an XML File .................................................................. 30 Export PDS HVAC Data to an XML File......................................................................... 31 Export PDS Piping Data to an XML File ......................................................................... 31 Export PDS Raceway Data to an XML File ..................................................................... 32 Exporting from FrameWorks Plus..............................................................................33 Member Criteria................................................................................................................35 Exporting Models from FrameWorks Plus....................................................................... 36 Importing Data from PDS: An Overview......................................................................37 Import Electrical Command .......................................................................................38 Import Electrical Data Dialog Box ................................................................................... 38 Import Electrical Data....................................................................................................... 39 Import Equipment Command .....................................................................................40 Import Equipment Data Dialog Box................................................................................. 40 Import Equipment Data..................................................................................................... 41 Import HVAC Command ...........................................................................................42 Import HVAC Data Dialog Box ....................................................................................... 42 Import HVAC Data........................................................................................................... 43 Import Piping Command ............................................................................................44 Import Piping Data Dialog Box ........................................................................................ 45 Import Piping Data............................................................................................................ 46 Import Structure Command ........................................................................................47 SmartPlant 3D Plant Design System (PDS) Guide 3 Table of Contents Import Structure Model..................................................................................................... 49 New Mapping File Command........................................................................................... 50 Mapping File Format ..................................................................................................51 Using the PDS Translator: An Overview.......................................................................55 Create PDS Export Data Files ....................................................................................56 Edit the Piping Translation Rules Workbook.............................................................57 Populate Dimension Table Name Rules.....................................................................59 Translate PDS Reference Data ...................................................................................60 Define Manual Information after Translation.............................................................62 Required Worksheets........................................................................................................ 65 Create Commodity Codes...........................................................................................69 PDS Piping Reference Data Translator Dialog Box...................................................70 Using the Piping Commodity Filter Cleanup Utility: An Overview..........................71 Use the Piping Commodity Filter Cleanup Utility............................................................ 72 Piping Commodity Filter Cleanup Utility......................................................................... 73 Using the Pipe Branch Cleanup Utility: An Overview...............................................74 Use the Pipe Branch Cleanup Utility................................................................................ 74 Pipe Branch Cleanup Utility ............................................................................................. 75 Using the Piping Reference Data Merge Utility: An Overview.................................77 Use the Piping Reference Data Merge Utility .................................................................. 77 Piping Reference Data Spreadsheet Merge Utility ........................................................... 78 Using the UoM Conversion Utility: An Overview.....................................................79 Use the UoM Conversion Utility ...................................................................................... 79 UoM Conversion Utility ................................................................................................... 80 Using the OD to NPD Utility: An Overview..............................................................82 Use the OD to NPD Utility ............................................................................................... 82 OD to NPD Utility ............................................................................................................ 82 Converting PDS EDEN to SmartPlant Visual Basic Symbols: An Overview............84 EDEN Translator Workflow.......................................................................................85 EDEN Translator Command Line Structure...............................................................86 EDEN Translator Outputs...........................................................................................88 EDEN Translator Required VB Editing .....................................................................89 EDEN Translator Example.........................................................................................93 Add a Symbol to Reference Data ...............................................................................97 Distributing Symbols Automatically..........................................................................99 Distributing Symbols Manually................................................................................101 Appendix A: Importer Workbooks..............................................................................102 Electrical Translation Map .......................................................................................103 CableTraySpec................................................................................................................ 103 ConduitSpec.................................................................................................................... 104 Generic-ItemCode-Map .................................................................................................. 104 Spec-Specific-ItemCode-Map......................................................................................... 105 Electrical User Attribute Sheets...................................................................................... 105 Equipment Translation Map .....................................................................................106 4 SmartPlant 3D Plant Design System (PDS) Guide Table of Contents Design Equipment Part Class Map Sheet ....................................................................... 108 Electrical Lighting Fixtures Sheet .................................................................................. 109 PDS Equipment Parametrics Sheet................................................................................. 110 Shapes and Nozzles Sheet............................................................................................... 111 SP3D Heat Transfer Equipment Sheet............................................................................ 112 SP3D Mechanical Equipment Sheet ............................................................................... 113 SP3D Vessels Sheet........................................................................................................ 114 Template AttMap Sheet.................................................................................................. 115 Template Item Sheet ....................................................................................................... 116 XML Equipment Item Sheet Name Map Sheet .............................................................. 117 Hangers Translation Map .........................................................................................118 HVAC Translation Map ...........................................................................................119 HVACSpec ..................................................................................................................... 119 ComponentMap .............................................................................................................. 119 HVAC User Attribute Sheets.......................................................................................... 120 Material........................................................................................................................... 120 Insulation Material.......................................................................................................... 120 Piping Translation Map ............................................................................................122 Generic-ItemCode-Map .................................................................................................. 122 PMC-Specific-ItemCode-Map........................................................................................ 124 Specialty-Map................................................................................................................. 125 Instrument-Map .............................................................................................................. 126 Support-Map ................................................................................................................... 128 Piping User Attribute Sheets........................................................................................... 128 Appendix B: Automated Industry Commodity Code Creation.................................129 Index................................................................................................................................136 SmartPlant 3D Plant Design System (PDS) Guide 5 Table of Contents 4 SmartPlant 3D Plant Design System (PDS) Guide Preface Preface This document describes how to intergrate Plant Design System (PDS®) with SmartPlant® 3D. This document pulls together information from several other SmartPlant 3D administrative and user documentation guides. The content includes a list of referencing PDS projects, exporting data from PDS and importing data into SmartPlant, conversion of EDEN symbols, and other administrative tasks. SmartPlant 3D Plant Design System (PDS) Guide 5 Preface SmartPlant 3D Documentation Set The SmartPlant® 3D documentation set is available as Adobe® PDF files. The content of the PDF files is the same content as online Help. To access these PDF documents in the software, click Help > Printable Guides. The documentation set is divided into four categories: • Administrative guides contain information about installing, configuring, customizing, and troubleshooting SmartPlant 3D. • User's guides provide command reference and how-to information for working in each SmartPlant 3D task. • Reference data guides define the reference data workbooks. Not all tasks have reference data. • ISOGEN guides Administrative Guides Project Management User's Guide - Provides instructions for setting up the databases, creating permission groups, backing up and restoring project data, assigning access permissions to the model, managing interference detection, defining and managing locations for Global Workshare, controlling duplication and consolidation of plants, tools for synchronization, regeneration of report databases, and version upgrade. SmartPlant 3D Database Integrity Guide - Provides information about the error messages in the database integrity reports, including meaning, cause, and possible corrective action. SmartPlant 3D Global Workshare Guide - Provides instructions for setting up the software and the databases to work in a workshare environment. SmartPlant 3D Installation Guide - Provides instructions on installing and configuring the software on both the client and server computers. SmartPlant 3D/IntelliShip Programmer's Guide - Provides information about custom commands, naming rules, and symbol programming. SmartPlant 3D Integration Reference Guide - Provides information about installing, configuring, and using SmartPlant 3D in an integrated environment. SmartPlant 3D Interference Checking Guide - Provides information on installing, configuring, and using the interference detection service. 6 SmartPlant 3D Plant Design System (PDS) Guide Preface SmartPlant 3D Interpreting Human Piping Specifications - Provides information about how to interpret human piping specifications so that you can create the corresponding piping specification in the software. SmartPlant 3D Plant Design System uploads/Ingenierie_Lourd/ pds-guide 2 .pdf