Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Epg quick manual 1 system structure

EPG quick manualSystem structure There is an example Programs input from the ? Gigabit Ethernet card ? Output by the ? -Channel QAM Card ? to the STB or HFC network The EPG use the IP transmit the EPG sever IP interface connect to the ? Gigabit Ethernet card ? ? Gbe ? interface with switch As shown in the ?gure select programs from the ? Gigabit Ethernet card ? port Output by ? -Channel QAM Card ? port Frequense is KHz as below C Start the EPG Run the Run D EPG EPG Middleware then check the MidTier icon Note If EPG system is IP output version we should edit ? TranDLLCo ?g ini ? in D EPG EPG Broadcasting LocalIP This is the EPG sever local IP address DestIP For set Destination IP address Support Unitcast Multicast DestPort For set the UDP port for destination IP Run the Click D EPG EPG Editor ? Then key-in the Password and User name Default password User name Admin C Add and con ?gure network TS service Add network At the main page as below Add the ??Network ? information Note check out before adding Right click and choose then input the network information as below Click ??OK ? for sure CNetwork ID should be same as that in the SMR or any other MUX device Add TS Right-click the Network and choose for adding TS information CInput the TS ID and Original network ID and these should also be the same as that in the SMR And input the Cable delivery information CThe frequency information can be checked as below Add service Service ID Same as the real program information in SMR CService name is the program name will showing on the TV Running Status choose ??Run ? ??Ok ? for sure SAVE After add all the service information for the TS Click to Save C Con ?gure table generation Click choose C generating ??NIT BAT SDT EIT ? Left side is the menu of all tables right side for choosing service or TS to generate table In quick con ?gure we take NIT SDT EIT for example as following Take the ?rst TS as the main frequency so the ?rst frequency NIT will contain the information of all the programs The other tables just need to send self table information as follows CNext ?gure is example for nd TS After setting to save Note check out before editing Edit Event list of digital TV service Click and choose C edit event information Left side show all the services right side are for adding event C Choose ? Add an event at the beginning ? will turn to this page Set the time by ? Duration s ? the unit is second Also ? can set the time by the ? Start time ? and ? End time ? Choose the type of ? Language code ? input the Event name and the Description for this event Then set it