Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Digitax st guide User Guide AC variable speed drive for servo motors Part Number - - Issue www controltechniques com CGeneral Information The manufacturer accepts no liability for any consequences resulting from inappropriate negligent or incorrect instal

User Guide AC variable speed drive for servo motors Part Number - - Issue www controltechniques com CGeneral Information The manufacturer accepts no liability for any consequences resulting from inappropriate negligent or incorrect installation or adjustment of the optional operating parameters of the equipment or from mismatching the variable speed drive with the motor The contents of this guide are believed to be correct at the time of printing In the interests of a commitment to a policy of continuous development and improvement the manufacturer reserves the right to change the speci ?cation of the product or its performance or the contents of the guide without notice All rights reserved No parts of this guide may be reproduced or transmitted in any form or by any means electrical or mechanical including photocopying recording or by an information storage or retrieval system without permission in writing from the publisher Drive software version This product is supplied with the latest version of software If this product is to be used in a new or existing system with other drives there may be some di ?erences between their software and the software in this product These di ?erences may cause this product to function di ?erently This may also apply to drives returned from a Control Techniques Service Centre The software version of the drive can be checked by looking at Pr or Pr and Pr The software version takes the form of zz yy xx where Pr displays zz yy and Pr displays xx i e for software version Pr would display and Pr would display If there is any doubt contact a Control Techniques Drive Centre Environmental statement Control Techniques is committed to minimising the environmental impacts of its manufacturing operations and of its products throughout their life cycle To this end we operate an Environmental Management System EMS which is certi ?ed to the International Standard ISO Further information on the EMS our Environmental Policy and other relevant information is available on request or can be found at www greendrives com The electronic variable-speed drives manufactured by Control Techniques have the potential to save energy and through increased machine process e ?ciency reduce raw material consumption and scrap throughout their long working lifetime In typical applications these positive environmental e ?ects far outweigh the negative impacts of product manufacture and end-of-life disposal Nevertheless when the products eventually reach the end of their useful life they can very easily be dismantled into their major component parts for e ?cient recycling Many parts snap together and can be separated without the use of tools while other parts are secured with conventional screws Virtually all parts of the product are suitable for recycling Product packaging is of good quality and can be re-used Large products are packed in wooden crates while smaller products come in strong cardboard cartons which themselves have a high recycled ?bre content If not re-used these containers can be recycled Polythene used on the protective ?lm and bags for